Confirmed Deployment Scope
Pilz GmbH & Co. KG will supply BMW exclusively with the PSSuniversal decentralized I/O system in the stated IP20 configuration. BMW plans to use the system worldwide. The evidence identifies the platform and enclosure protection level but does not define plant locations, rollout dates, quantities, or cabinet designs.
PROFINET Head Module Architecture
The deployment required a newly developed PSSuniversal head module with a PROFINET interface. The head module provides the network-facing connection for the decentralized I/O platform; the available evidence does not specify its order number, supported I/O modules, controller compatibility, topology limits, diagnostics, update times, redundancy, or firmware.
| Selection field | Confirmed requirement | Information still required |
|---|---|---|
| I/O platform | PSSuniversal decentralized I/O | Module types and channel count |
| Network interface | PROFINET head module | Device configuration, topology, and controller details |
| Protection level | IP20 | Installation environment and enclosure design |
| Deployment | Worldwide BMW use | Regional approvals and site-specific requirements |
| Development | Head module developed with BMW | Orderable configuration and release documentation |
Engineering Selection Boundaries
Treat the announcement as confirmation of platform direction, not as a complete design specification. Before selecting hardware, obtain the exact head-module identifier and verify the required I/O mix, controller integration, network configuration, environmental conditions, enclosure protection, diagnostics, and regional approvals against current Pilz documentation. Do not infer those properties from the IP20 rating or the presence of a PROFINET interface.
Commissioning Verification
Verify the installed assembly against the approved bill of materials, confirm that the selected device description matches the physical head module, and test controller-to-I/O data exchange and diagnostics under the project configuration. Acceptance should also confirm that the final enclosure and installation conditions satisfy the required protection for each site; the evidence establishes only the I/O system's IP20 configuration.
FAQ
Which decentralized I/O system will BMW use worldwide?
BMW plans to use the Pilz PSSuniversal decentralized I/O system worldwide in the stated IP20 configuration.
What network interface does the new PSSuniversal head module use?
The newly developed head module uses a PROFINET interface. The evidence does not provide its order number, firmware, topology limits, or performance data.
Does the BMW announcement provide enough information to select PSSuniversal hardware?
No. Confirm the exact head module, I/O modules, controller compatibility, network configuration, enclosure requirements, diagnostics, and regional approvals before completing the design.