Diagnose the Full-Page Condition
In LOGO! Soft Comfort 8, reaching the bottom of the visible programming page does not mean that another program line must fit on that same page. The evidence identifies the required correction as using additional pages. No error message is associated with the reported condition.
| Observed condition | Interpretation | Required action |
|---|---|---|
| No room for another program line | The current page is full | Add another program page |
| No warning or error message | This is a workspace-layout issue, not a reported software fault | Continue the program on the additional page |
Add Program Capacity
Create or switch to an additional page in the LOGO! Soft Comfort 8 programming workspace, then continue the program there. The available evidence does not identify the exact menu command, toolbar control, or keyboard shortcut, so do not rely on an assumed command name; locate the software control for adding or navigating pages.
Verify the Correction
Confirm that the additional page opens and accepts the next program line. If it does, the full-page condition is resolved. If another page cannot be created, record what controls are visible and whether the software displays a message; those details are necessary to distinguish a navigation problem from a separate limitation.
FAQ
Why can I not add another line in LOGO! Soft Comfort 8?
The current programming page has reached its visible bottom. Continue the program on an additional page.
Does a full LOGO! Soft Comfort 8 page generate an error message?
No error message was reported for this condition. The symptom was simply that no room remained for another program line.
How do I verify that adding a LOGO! program page solved the problem?
Open the additional page and confirm that it accepts the next program line. Successful placement verifies that the original issue was the full page.