HMI and touchscreens
Earlier articles
Selection guide
How to Prove a PC-Based HMI Before Replacing Panel Terminals
Use an isolated bench controller to compare candidate PC-based HMI runtimes. Test the read path, one write to a spare test tag, touch response, communication loss and automatic recovery. Check the deployed license on the target PC.
Explainer
Why EasyBuilder Pro PC simulation stops after 15 minutes
Yes, up to a point you cannot log on. EasyBuilder Pro online simulation polls an RS-485 meter from the PC through a USB converter, but Weintek documents a 10-minute limit when the target device is connected directly to the PC, so the session ends and needs a manual restart. Prove the link in simulation; run the hourly log on an operator panel or a dedicated logger.
Troubleshooting
Why WinCC Runtime Reports Project Is Locked and How to Recover
"Project is locked" in WinCC Runtime is an ownership conflict, not a license fault: a live session, or a stale ProjectOpened.lck left behind by a crash or power loss, still claims the project. Close every session that could own it, back it up, then clear the lock with reset_wincc.vbs or by removing ProjectOpened.lck; on a client, open the project by its UNC path.
Explainer
Why a USB HMI transfer cable cannot be hand built
There is no pin map to copy: the cable is an active USB device whose bridge IC and firmware descriptors do the work, so a soldered copy enumerates as nothing. Buy the documented accessory for the tool-port path, or move the project by Ethernet or USB memory.
Troubleshooting
Why a WinCC Advanced SQL Read Script Returns Nothing
The read script fails for faults the working INSERT never meets: a missing space turns SELECT * FROM into FROMKayitlar, a dangling ORDER BY has no column, and MoveFirst after MoveNext pins the cursor on row one. Clear them in order: DSN visible to the runtime, SQL text valid, recordset non-empty, value inside the DInt range. Each fault masks the next.
Troubleshooting
Animating Four Images With a Graphic List in WinCC RT
SimulateTag is not missing from WinCC RT. The function is documented for Basic Panels, Panels, Comfort Panels and RT Advanced targets and simulates Integer tags from a function list, while RT Professional uses the WinCC Runtime Professional Tag Simulator. Verify the configured runtime target, then animate four images with a graphic list on a dedicated Integer tag at a short cycle.
Troubleshooting
Why the WinCC V13 Professional runtime command stays disabled
The greyed-out start command is an installation and target problem, not a license problem. The active Advanced button proves only that the Advanced runtime is installed. Install WinCC Runtime Professional so UPD1 has a base to update, generate the .MCX by compiling and transferring, and leave SP1 out of the decision.
Troubleshooting
Why the Vision Text Area Touch Keyboard Stops After 7.8.0
On Ignition 7.8.0 the Vision Text Area fails its touchscreen permission check, so the on-screen keyboard never opens for it while every other touch component keeps working. The fix shipped in 7.7.7 and reached the 7.8 line by 7.8.2. Until the Gateway is upgraded, a one-line mousePressed script calling system.gui.showTouchscreenKeyboard restores input.
Troubleshooting
Fixing a Missing On-Screen Keyboard From Scripted Input Dialogs
The scripted input dialog and the touchscreen keyboard are both modal, and one modal dialog cannot open over another, so the field inside the prompt never raises the keyboard. Replace the call with a popup window of palette inputs, or wrap it in a function that branches on touch mode and calls system.gui.showTouchscreenKeyboard or system.gui.showNumericKeypad.
Explainer
WinCC RT vs RC Licenses and Moving a Runtime Key
RT authorizes running the configured WinCC project; RC (Runtime plus Configuration) is what lets a PC also edit it in WinCC Explorer, and the number in a class such as RT 128 is the external-tag capacity. A license key reaches another PC only through the documented transfer, which removes it from the source machine.
Troubleshooting
Backing up a TP 1500 Comfort panel to a PC
Take the image to the PC over Ethernet with TIA Portal's Backup from online device or with ProSave, or over a USB-A to mini-B cable from the PC to the panel. A USB-stick backup that has been copied to a PC and written back is not a supported archive path: the restore can report success and still leave Runtime waiting at Connecting to host.
Troubleshooting
Why WinCC Flexible Cannot Connect to a TP177 Micro by USB
The tag exchange with the S7-200 only proves the panel's runtime path; a project download uses a separate PC-to-loader path through the USB/PPI Multi-Master cable. With the transfer channel enabled and USB selected, the gate is the cable's E-Stand revision: an E-Stand:02 cable never reaches the TP177 Micro loader, and E-Stand:05 or later does.