HMI and touchscreens
Earlier articles
How-to
How to Identify an Unbranded Legacy Touch Panel Before Replacing It
Identify the panel from its rear nameplate: photograph it, record the full model text including the suffix, and match it to the exact model's documentation. A 24 VOLT marking and a matching screen size establish nothing about model, driver, cable, or cutout compatibility, and two look-alike panels from one family are not interchangeable.
How-to
Migrating a WinCC 7.0 Project From Windows XP to Windows 7
Install WinCC 7.4 on Windows 7, reinstall cleanly if the SP1 package fails, migrate the project through 7.2 with Project Migrator, license the runtime for 1024 tags because 128 runs demo mode, and replace the CP 5611 card with a CP 5612, which has 64-bit SIMATIC NET support. Each gate fails separately, so test each one.
Explainer
Why a PSB Backup Cannot Run in WinCC Flexible PC Runtime
No. A .psb file is a ProSave device image that restores only to the panel model it came from, and Siemens documents that it cannot be loaded or edited in the engineering tool. To run the application on a PC, open the source .hmi project, change the device type to the PC runtime, recompile and license it.
Troubleshooting
Recovering access to a password-protected HMI panel without a backup
With no project and no backup, the panel on the machine is the only working copy, and the password cannot be removed non-destructively: the documented change path is a project transfer that overwrites passwords, and any reset that restores access deletes the application. Preserve the running panel, recover the project from the machine builder or integrator, and involve vendor support with the full order number and serial before anything destructive.
Troubleshooting
Fixing Weintek HMI to Mitsubishi FX PLC Communication
A Weintek panel that shows communication errors against an FX0N, FX1N, FX2N or FX3 CPU is nearly always wired with the wrong cable pinout for the port pair. Match the HMI COM port and PLC port to the Weintek PLC Connection Guide, set GX Developer parameters only for adapter boards, and keep the 1 m cable.
How-to
Binding PLC tags from different DBs to a WinCC HMI UDT
No configuration makes an HMI UDT span multiple data blocks: a structured HMI tag resolves to one addressable PLC instance. With the PLC program frozen, keep every existing address, create one external HMI tag per variable, and assign them to the faceplate interface properties at each instance; the screen-window tag prefix cannot supply per-equipment data and only reaches shared values with the documented marker.
How-to
Adding Flowmeter and Sensor Graphics to an EasyBuilder Pro Screen
EasyBuilder Pro has no dedicated flowmeter or temperature-sensor object, and it does not need one. Put a picture from the Shape or Picture Library (or your own imported image) on the screen to identify the instrument, then add a separate numeric object bound to the device address for the live measurement — the picture never carries the data connection.
How-to
Editing a Delta DOP HMI project without breaking PLC comms
Downloading a revised project to a Delta DOP panel replaces only the panel's project; the PLC program and its port configuration are untouched. The link survives because the driver and serial parameters are stored separately in each device and a revision leaves them matching. Record both sides first, then prove read and write after the download.
Selection guide
Counting HMI device connections for an extrusion machine upgrade
Seven controllers — one CompactLogix, four temperature controllers and two pressure controllers — need seven HMI device connections when wired directly, and the connection entitlement, not the loop count, decides the platform. Current Ignition Edge documentation includes unlimited device connections for included drivers, so the direct architecture fits; CompactLogix can instead aggregate the six process controllers into one connection.
How-to
Connecting One HMI Panel to Two PLCs Over Serial
Yes. A two-port panel — one RS-232-only port, one selectable RS-232/RS-485 port — runs two PLCs: one point-to-point link per port, or both PLCs as separately addressed slaves on the single RS-485 bus. Give each link its own cable, driver and matching serial settings, and prove one link before configuring the next.
How-to
How to Rotate a 3D Object on a Touch Panel With Drag Input
Leave the camera fixed and rotate the object: map each drag to a rotation delta at 0.3 degrees per pixel and compose it onto the object's current orientation as a quaternion, around a pivot at its center. Only the object transform changes per drag, so no camera up-vector or translation is ever recalculated.
How-to
Building a complete on-screen keyboard from bitmap HMI assets
Start from the terminal vendor's most complete keyboard demo, not a blank bitmap: the demo already carries the key-state and editing logic, so you extend its key map, replace the artwork, and adjust its macros to a written character specification. Then verify three things separately: the characters shown, the character each touch delivers, and the value the receiving application accepts.